Description

The system is specially designed for educational, training, and research applications in Smart Water Quality and Wastewater Monitoring. It enables students, researchers, and professionals to understand real-time water quality analysis, sensor integration, IoT-based monitoring, environmental data acquisition, and smart environmental management through practical, hands-on experimentation.

• Product Description
• Panel Construction Material : Aluminum Profile ( 40 x 40 mm)
• Panel Dimension :- 90 x20 x60 cm(± 5 cm )
• Table Size :- 95 x 75 x 75 cm (± 5 cm) 

• Panel Consist of following Sensors

A. Conductivity Sensor

• • Measurement Range: 0 to 20 mS/cm
  • Accuracy: ±2% of full scale
  • Temperature Compensation: Automatic
  • Interface: Analog or I2C/UART
  • Operating Voltage: 5V DC
  • Features: Waterproof probe, calibration support

B.  pH Sensor

• • Measurement Range: 0 to 14 Ph
  • Accuracy: ±0.1 pH
  • Interface: BNC with signal conditioning board
  • Calibration: Manual two-point calibration
  • Temperature Compensation: Optional with temp input Operating Voltage: 5V DC

C. Level Sensor

• • Type: Capacitive/Ultrasonic level sensor Range: 0 to 100 cm, Output: Analog (0–5V) or Digital I2C/UART Accuracy: ±1 cm
  • Application: Water tank or pipe level measurement

D. Flow Sensor

• • Type: Hall-effect turbine,
  • Range: 0.3 – 6 L/min (or higher depending on model)
  • Output: Pulse signal (digital)
  • Operating Voltage: 5V–24V
  • Interface: Digital interrupt pin of microcontroller

E. Ultrasonic Sensor

• • Model: HC-SR04 or Industrial grade equivalent
  • Range: 2 cm – 400 cm
  • Accuracy: ±3 mm
  • Interface: Digital trigger and echo pins
  • Features: Water-resistant casing for industrial use (IP65+)

F. Temperature Sensor

• • Type: DS18B20 / PT100 / RTD / NTC thermistor
  • Range: -55°C to +125°C
  • Accuracy: ±0.5°C typical Interface: 1-Wire/Digital/Analog
  • Application: Water temperature monitoring

G. Total Dissolved Solids (TDS) Sensors

• • Range: Consumer-grade pen meters
  • Turbidity Sensors
  • Range: 0 to 1000 NTU (min)

• Support for MQTT, HTTP, or Modbus protocols
• Real-time data visualization and logging on Smart Dashboard
• Prototyping Breadboards: For circuit building
• Power Supply: 5V/12V DC adapters for sensors