Description

The system is designed as a Smart Building Sensor Suite for integrated monitoring, control, and demonstration of smart building technologies. It is intended for educational, training, and demonstration purposes and shall be compatible with the Sensor Training Platform and IoT Explorer, providing hands-on understanding of sensors, actuators, IoT architecture, cloud connectivity, and real-time monitoring.

Product Description

• Panel Construction Material: Aluminum Profile (40 x 40 mm)
• Panel Dimension: – 90 x20 x60 cm (± 5 cm)
• Table Size :- 95 x 75 x 75 cm (± 5 cm)
• System Configuration: Smart Building Sensor Suite with integrated sensors, actuators, HMI, IoT gateway, communication interfaces, test points, and ready building structure prototype.

CCTV Camera

• Resolution: 2MP or higher
• IR Night Vision: Yes
• Motion Detection: Yes
• ONVIF Support: Yes
• Output: USB or IP

Motion Sensor (PIR)

• Detection Range: ≥5 meters
• Detection Angle: 120°
• Output: Digital

RFID Module

• Frequency: 125 kHz / 13.56 MHz
• Operating Range: 2–10 cm
• Interface: Serial
• Card Compatibility: EM4100 / Mi-fare cards

Smoke Sensor

• Sensor Type: Photoelectric
• Output: Digital & Analog
• Detection Range: 200–1000 ppm smoke density

Fire Sensor

• Infrared flame sensor with detection range of 760 nm–1100 nm.

LPG Gas Sensor

• Detection Range: 200–10000 ppm
• Output: Analog
• Sensor Type: MQ-Series

Air Quality Sensor

• Detection: PM2.5 & PM10
• Output: UART/I²C
• Sensor Type: Laser-based

CO2 Sensor

• Range: 400–5000 ppm
• Accuracy: ± (50 ppm + 3% of reading)
• Output: UART

Ambient Temperature Sensor

• Range: -40°C to +125°C
• Output: I²C

Humidity Sensor

• Range: 0%–100% RH
• Accuracy: ±3% RH
• Output: I²C

Light Sensor (LDR/Photo Diode)

• Range: 1–1000 Lux
• Output: Analog

Relay Module

• Configuration: 4/8 Channel
• Logic: 5V Logic Compatible
• Load Capacity: 230V/10A

Hooter

• Voltage: 12V DC
• Sound Level: ≥90 dB at 1 m

Touch Panel (HMI)

• Display: 5”–7” TFT Capacitive Screen
• Interface: RS232/TTL/USB
• GUI: Programmable
• Compatibility: Microcontroller/IoT Boards

IoT Gateway

IoT gateway with Zigbee, USB, and Wi-Fi connectivity, including Zigbee receiver for PC interfacing.

Building Prototype

Ready building structure prototype with sensors mounted on the structure for demonstration and practical training.

Test Points

System shall have dedicated test points for checking sensor outputs and provisions for creating switch faults in each sensor for troubleshooting and fault-diagnosis training.

Display & Sensor Interface

System shall include a 1.77-inch color display and sensor connection ports for checking sensor outputs in the field.

Trainer shall support the following experiments and practical training: –

• Testing and understanding of Motion Sensor.
• Testing and understanding of RFID Card Reader.
• Testing and understanding of Smoke Sensor.
• Testing and understanding of Fire Sensor.
• Testing and understanding of LPG Gas Sensor.
• Testing and understanding of Air Temperature & Humidity Sensor.
• Testing and understanding of CO2 Sensor.
• Understanding and demonstration of CCTV Camera.

Internet of Things Training

The system shall provide practical understanding of the following IoT concepts and applications: –

• Basics of IoT and its architecture.
• Working of sensors such as Temperature & Humidity, Air Quality, Soil Moisture, Ambient Light, Soil/Water Temperature, and PIR Sensor.
• Interfacing of sensors and actuators with IoT systems.
• Sending sensor data to the cloud.
• Sensor data monitoring using PC and mobile devices.
• Programming languages used for IoT.
• Different applications of IoT.