Laboratory Oven

Description

Product Description :

Standard double wall fabrication. Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet.  Exterior fabricated  out of thick mild steel sheet duly finished in stove enamel off-white  paint  or paste mat finish colour combinations.

The gap between the walls is filled with-special grade glass-wool for heat insulation.  Inner chamber is ribbed for placing shelves at convenient levels.  Provided  with two or three removable shelves.  Special  elegant door closing device has been provided. Nichrome wire heating elements -provided on three sides attain quick and uniform heating in range of 50oC to 250oC + 1oC controlled by capillary type thermostat.

L-shaped thermometer is built-in type.  Control panel is provided with selector switch of high or low rates of power, thermostate control knob and indicators for mains & thermostat.  Supplied with cord and plug.  The equipment is suitable to operate on 220 V AC 50 Hz single phase.

Technical Specification :

Model Chamber size in mms/inches) No. of shelves
PSW/HL/246.1 300 x 300 x 300 (12″ x 12″ x 12″ ) 2
PSW/HL/246.2 275 x 400 x 275 (11″ x 16″ x 11″) 2
PSW/HL/246.3 350 x 350 x 350 (14″ x 14″ x 14″) 2
PSW/HL/246.4 400 x 400 x 400 (16″ x 16″ x 16″) 2
PSW/HL/246.5 450 x 450 x 450 (18″ x 18″ x 18″) 2
PSW/HL/246.6 600 x 450 x 450 (24″ x 18″ x 18″) 2
PSW/HL/246.7 600 x 600 x 600 (24″ x 24″ x 24″) 2
PSW/HL/246.8 900 x 600 x 600 (36″ x 24″ x 24″) 2

Optional :-

i) Air Circulating fan.

ii) Timer 0-24 hours

iii) Digital Temp. Indicator-Cum- Controller.

iv) Imported Thermostat “EGO”/ “JUMO” German with the accuracy of ±1°C.

v)  Digital temp. Indicator.