Home
About us
Products
Enquiry
Contact us

Our Products

I.T.I : Turner


Caliper out side spring joint 150 mm

Caliper inside spring joint 150 mm

Caliper odd-leg firm joint 150 mm ..

Steel Rule 150 mm ..

Scriber 150mm x 3 mm .

Hammer ball pein 250 gm with handle .

Centre punch 100 mm .

Prick punch 100 mm .

Divider spring joint 150 mm .

Safety goggles clear glass (Good quality) .

B: TOOLS, EQUIPMENTS AND GENERAL OUTFIT

Surface plate 60 x 60 cm --- .

Work bench 240 x 120x 90cm high --- .

Marking table (CI) 120 x 120 cm ---

Bench vice 125 mm jaw ---

Vee-Block 75 and 125 mm with clamp ---

Universal Surface gauge 250 mm arm ---

Hammer ball pein 750 gm with handle ---

Chisel cold flat 20 x 150 mm ---

Hammer copper/brass 500 gm with handle ---

Hacksaw fixed 200 mm (Pistol grip) ---

File flat 300 mm rough ---

File flat 250 mm 2nd cut ---

File flat 250 mm smooth ---

File half round 250 mm 2nd cut ---

File round 250 mm smooth

File half round 150 mm smooth

Knurling tool revolving head (Rough, med, fine) diamond
and straight

Combination set 300 mm (Complete Set) ---

Screw Driver 200 & 300 blade heavy duty ---

Spanner double ended 6 mm to 21 mm

Spanner adjustable 200 mm . ---

Pliers flat nose 150 mm side cutting .

Caliper transfer inside 150 mm --- 3 nos.

Micrometer Outside 0 to 1” Reading 0.0001” . ----

Micrometer Outside 0 to 25 mm Reading 0.01 mm

Micrometer Outside 25 to 50 mm Reading 0.01 mm ----

Micrometer Outside 50to 75 mm Reading 0.01 mm ----

Micrometer Inside up to 25 mm Reading 0.01 mm 1set

Micrometer Inside up to 50 to 150 mm reading 0.01 mm -----

Depth Gauge Micrometer 0 to 150 mm Reading 0.01 mm -----


Vernier Caliper Outside, Inside and Depth 200 mm /8
inches with metric & inch scale

Dial Vernier Caliper with metric 200 mm reading 0.05 mm

Vernier Bevel Protractor 300 mm blade -------

Vernier Micrometer 0 - 25 mm o/s LC 0.001mm

Vernier Micrometer 25 - 50 mm outside reading 0.001mm

Vernier Micrometer 0 inch to 1 inch. Outside Reading
0.0001 inch

Feeler Gauge 100 mm blade metric set ---

Radius Gauge 1 to 7 mm & 7.5 to 15 mm ---

Centre Gauge com. 60°, 55° and 29° ---

Screw Pitch Gauge Whitworth & Metric each ---

Drill Angle Gauge ---

Dial Test Indicator 0.01 mm with magnetic base ---

Vernier Height Gauge with dial 300 mm L.C. 0.01 mm ---

Try Square 150 blade ---

Magnifying Glass 75 mm dia. ---

Plain Ring and Plug Gauge 12 to 50 mm by 1mm --- each

Wheel Dresser Huntingon-type with star cutter --- .

Wheel Dresser Diamond ( inserted-0.75 or 1 Carat ) ---

Screw Thread micrometer interchangeable .

Morse Taper Plug & Ring Gauge no. 0 to 7 MT ---

Sin Bar with centers 200 mm ---

Slip Gauge metric set ( 87 pieces in a Box ) ---

Morse Taper Sleeves No. 0-1, 1-2, 2-3, 3-4, 4-5. ---

Drill Drift --- .

Twist Drill straight shank 1 to 12 mm by 1 mm --- .

Twist Drill taper shank 10-12 mm by 0.5 mm --- ( Box )

Drill Chuck 12 mm cap with key --- .

Tap & Die B.A. No. 0 to 10 in a box --- ..

Tap & Die metric set up to 25 mm ---

Tap & Die B.S.F. up to 1 inch --- .

Tap & Die B.S.W. up to 1 inch --- .

Reamer machine straight flute 6 to 25 mm --- .

Reamer Adjustable 10 to 20 mm --- .

Tool Holder RH & straight for mm square tool bit --- .

Parting Tool Holder with H.S.S. blade ---

Tool Bits 12 X 150 mm sq. assorted shaped ---

Boring Tool holder for 6 mm sq. tool bit ---

Steel Rule 300 mm with Metric and Inch ---

Oil Can ½ pint ( pressure feed system ) ---

Dog Carrier 235, 50 and 75 mm --- 1

Angle Plate with slots 200 mm ---

Spirit Level 0.05 meter 200 m ---

Tool Maker’s button ---

Combination Drill A-2.5 and A-1 ---

Oil Stone 12 mm sq. x 100 long fine ---

Tap Wrench ( adjustable ) ---

Die Handle ---

Tool Bit assorted sizes on holder ---

Machine Vice 100 mm jaw ( For Drill Machine ) ---

Chalk Board on mobile stand --- .

Spare Grinding Wheel Ajax type for carbide tool --- .

Almirah-1980x 910 x 480 mm --- 2 No.

St. Locker with drawer ( Pigeon holes ) --- . .

Desk --- .

Stool .

Angle Gauge for tool grinding ---

Hand Chaser M-12 & M-16 ( External ) ---

Hand Chaser M-12 & M-16 (Internal ) ---

Revolving Centrer ( to suit Lathe tailstock ) ---


Tool Cemented carbide assorted shaped (External) for
steel turning –set of

Thread Plug Gauge M-20 & M-21 ---

Thread Ring Gauge M-20 & M-21 --- .

Machine Chase M-12TO m-21 (Std. Series) to suit on ---

Coventry Die head ---

Gauge Drill Grinding ---

Magnetic Chuck 150 mm dia.( Circular type ) --- .

Lathe Mandrels (Diff. Types) --- .

Conventry Type Die Head ( Self opening ) ---

Collapsible Tap with attachment ---

Combination Drill --- each.
Fire Extinguisher and buckets

MACHINERIES AND EQUIPMENTS

Lathe S.S. & S.C. ( All geared head stock ) 15 cm center
height, to admit 120 cm between centers. Machine to be
motorized and supplied with coolant installation, 1-jaw
Independent chuck 250 mm, 3-jaw self-centering chuck 150
mm, fixed steady, traveling steady, face plate, driving plate, 4-
way tool post, quick change gear box for Metric or British
threads, live and dead centers with taper attachments.

Lathe S.S & S.C.(all geared type) 20 cm. Center height, 120 cm
between centers, gap bed machine to be motorized and supplied
with coolant installation, 4-jaw independent chuck, 300 mm , 3-
jaw self-centering chuck 200 mm fixed steady, face plate,
driving plate, 4-way tool post, quick change gear box for
Metric/British threads, live and dead centers with taper
attachments.

Lathe tool room S.S. & S.C. (all geared type) 15 cm center
height, 120 cm between centers. Machine to be motorized and
supplied with coolant installation, 1-jaw independent chuck 250
mm, 3-jaw self-centering chuck 150 mm fixed steady, traveling
steady, face plate, driving plate, 1-way tool post, draw in type
collets set up to 25 mm, 0.5 mm, relieving attachments.

Lathe S.S. & S.C (Cone pulley type) 15 cm height 90 cm
between centers. Machine to be motorized 1-jaw independent
chuck 250 mm, 3-jaw self-centering chuck, 150 mm single tool
post.

Grinding machine pedestal type D.E. 150 mm dia. Wheel with
wheel guard and vision.

Grinding machine pedestal type E.E. 150 mm dia. Wheel with
wheel and vision guard

Drill machine pillar type-motorized up to 12 mm. Cap. .

Power saw machine – hydraulic feed system – 400 mm.
Blade size.

Capstan Lathe 250 mm sawing, 25 mm spindle bore with all
accessories and attachment including collect chucks and sets.

CNC Trainer Lathe .

CNC Turning Tools assorted

CNC Boring tools assorted

CNC Grooving tools (External & Internal)

VCP .

Color TV Monitor .

Related Video & Audio Cassette as required

Electronic Vernier Caliper inch and mm
8”/200 mm. LCM 0.005”/0.001 mm

Dig metric electronic outside Micrometer
(0 to 25 mm & 25 to 50 mm) LC 0.001 mm.

CNC Trainer Drilling .

CNC Trainer Miller .

 

 



Copyright © 2013 Puriscientific.com All rights reserved. by CHADHA INFOMEDIA